7
Saving and Printing Data
To save traces and setups to a new file on the USB mass storage device
258
You cannot create new file names in the oscilloscope's internal
memory, you can only overwrite the existing files.
5 When you have selected the file name to be overwritten,
press the Press to Save softkey to save your current setup and
waveform trace to the file.
1 Follow steps 1-3 in the procedure on
2 Turn the Entry knob and press the far left softkey to select a
directory on a USB mass storage.
3 To create a new file name, press the New File softkey.
New file names can only be written to a USB mass storage
device, not the internal memory.
page
257.
6000 Series Oscilloscope User's Guide