To Print The Display; To Set The Clock - Agilent Technologies 6000 Series User Manual

2 Front-Panel Controls

To print the display

To set the clock

66
You can print the complete display, including the status line and
softkeys, to a USB printer or to a USB mass storage device by
pressing the Quick Print key. You can stop printing by pressing
the Cancel Print softkey.
To set up your printer, press Utility&Print Config.
For more information on printing, see
printing" on page 246.
The Clock menu lets you set the current date and time of day
(24-hour format). This time/date stamp will appear on hardcopy
prints and directory information on the USB mass storage
device.
To set the date and time, or to view the current date and time:
1 Press Utility&Options&Clock.
Year set Month set
2 Press the Year, Month, Day, Hour or Minute softkey and rotate
the Entry knob to set to the desired number.
The hours are shown in the 24-hour format. So 1:00 PM is hour
13.
The real-time clock only allows selection of valid dates. If a day
is selected and the month or year is changed so the day is
invalid, the day is automatically adjusted.
Day set Hour set
6000 Series Oscilloscope User's Guide
"To configure
Minute set Return to
previous menu