Agilent Technologies 6000 Series User Manual page 18

1 Getting Started
18
Table 3 Accessories available
Model Description
N2918A 6000 Series Oscilloscope Evaluation Kit
1180CZ Testmobile oscilloscope cart (requires N2919A adapter kit)
N2919A Testmobile Adapter Kit
54684-44101 Front-panel cover
N2605A-097 USB cable
10833A GPIB cable, 1 m long
10073C Passive probe, 10:1, 500 MHz, 1.5 m
10074C Passive probe, 10:1, 100 MHz, 1.5 m
54620-68701 Digital probe kit
54684-42301 Digital probe cable guide (cable tray)
Pomona 4119-50 50-Ohm Feedthrough (not available from Agilent Technologies)
1130A InfiniiMax 1.5 GHz InfiniiMax differential probe amplifier
1141A InfiniiMax 200 MHz differential probe (with 1142A power supply)
1144A 800 MHz active probe (with 1142A power supply)
1145A 750 MHz 2-channel active probe (with 1142A power supply)
1156A 1.5 GHz active probe
01650-61607 16:16 logic cable and terminator (for use with header on target
system)
54620-68701 16:2 x 8 logic input probe assembly (shipped standard with MSO
models)
1146A 100 kHz Current probe, AC/DC
10070C 1:1 Passive Probe
10072A Fine-pitch probe kit
10075A 0.5 mm IC clip kit
10076A 100:1, 4 kV 250 MHz probe
E2613B 0.5 mm Wedge probe adapter, 3-signal, qty 2
E2614A 0.5 mm Wedge probe adapter, 8-signal, qty 1
E2615B 0.65 mm Wedge probe adapter, 3-signal, qty 2
E2616A 0.65 mm Wedge probe adapter, 8-signal, qty 1
E2643A 0.5 mm Wedge probe adapter, 16-signal, qty 1
E2644A 0.65 mm Wedge probe adapter, 16-signal, qty 1
N2772A 20 MHz differential probe
N2773A Power supply for N2772A
N2774A 50 MHz current probe AC/DC
N2775A Power supply for N2774A
6000 Series Oscilloscope User's Guide