To Decode Can Data - Agilent Technologies 6000 Series User Manual

To decode CAN data

N O T E
6000 Series Oscilloscope User's Guide
For CAN triggering setup see
1 Connect the CAN signal to one of the oscilloscope's input
channels.
2 Set up the trigger mode as described in
Oscilloscope"
trigger type.
3 Select the CAN serial decode mode:
a Press the Acquire key.
b Press the Serial Decode softkey.
Display Decode
decode mode
c In the Serial Decode Menu, press the Mode softkey.
d Use the Entry knob (or repeatedly press and release the
Mode softkey) to select the CAN serial decode mode.
page 107.
on page 87. You can use CAN trigger or another
Signal
setup menu
Displaying Data
"Triggering the
Return to
previous menu
225
6