Getting Started - Agilent Technologies 6000 Series User Manual

Agilent 6000 Series Oscilloscope
User's Guide
1

Getting Started

To inspect package contents
To adjust the handle 19
To power-on the oscilloscope
Ventilation requirements
To connect the oscilloscope probes
To verify basic oscilloscope operation
To compensate the oscilloscope probes
To calibrate the probes
Passive Probes Supported
Active Probes Supported
Using Quick Help 28
To get started using the oscilloscope:
Unpack the oscilloscope and verify the contents.
Adjust the oscilloscope's handle position.
Apply power to the oscilloscope.
Connect the probes to the oscilloscope.
Verify basic oscilloscope operation and compensate the
probes.
A Quick Help system is built into the oscilloscope. Instructions for
using the quick help system are given on
Agilent Technologies
16
20
20
22
23
24
25
25
26
page 28.
15