To Make An Automatic Measurement - Agilent Technologies 6000 Series User Manual

To make an automatic measurement

6000 Series Oscilloscope User's Guide
Preshoot and Overshoot
• Preshoot*
• Overshoot*
* Measurement on analog channels only.
A brief description of how to make automatic measurements is
given on page
Quick Meas makes automatic measurements on any channel
source or any running math function. The results of the last four
measurements selected are displayed on the dedicated line
above the softkeys, or in the display area when some menus are
selected. Quick Meas also makes measurements on stopped
waveforms when you are panning and zooming.
Cursors are turned on to show the portion of the waveform
being measured for the most recently selected measurement
(right-most on the measurement line).
1 Press the Quick Meas key to display the automatic
measurement menu.
Source Select
select measurement
2 Press the Source softkey to select the channel or running
math function on which the quick measurements will be
made.
Only channels or math functions that are displayed are
available for measurements. If you choose an invalid source
channel for a measurement, the measurement will default to
the nearest in the list that makes the source valid.
61.
Press to make Erase all
measurement measurements
Making Measurements
Additional Measurement
settings Thresholds
5
183