By 100 Mhz Bandwidth Models - Agilent Technologies 6000 Series User Manual

By 100 MHz Bandwidth Models

6000 Series Oscilloscope User's Guide
The following active probes use their own power supply.
Therefore, they can be used on all 6000 Series oscilloscopes,
including the 100 MHz bandwidth models.
Many active probes have a 50
impedance of 6000 Series 100 MHz bandwidth models is fixed at
1 M . When connecting these probes to 6000 Series 100 MHz
bandwidth models, a 50
Pomona 4119-50 (not available from Agilent Technologies) is
required.
Table 7 Active Probes for All 6000 Series Oscilloscopes
Active Probes
1141A with 1142A supply
1144A with 1142A supply
1145A with 1142A supply
N2772A with N2773A supply
N2774A with N2775A supply
Getting Started
input impedance. The input
feedthrough terminator such as
Quantity Supported
1
4
4
2
4
4
27