2. Place the IDPROM on an antistatic mat.
▼ Install the IDPROM
Before you begin, complete these tasks:
Read the section,
■
Power off the server, using one of the methods described in the section,
■
Off the System" on page
"Extend the Server to the Maintenance Position" on page 70
■
"Disconnect Power Cords From the Server" on page 68
■
"Perform Electrostatic Discharge – Antistatic Prevention Measures" on page 73
■
"Remove the Top Cover" on page 73
■
"Remove the Service Processor" on page 124
■
128
SPARC Enterprise T5440 Server Service Manual • June 2011
"Safety Information" on page
67.
63.
"Powering