Hard Drive Device Identifiers - Fujitsu SPARC Enterprise T5440 Service Manual

3. Close the latch to lock the drive in place.
4. If you performed any additional service procedures, see
on page 157.

Hard Drive Device Identifiers

The following table lists physical drive locations and their corresponding default
path names in OpenBoot PROM and Solaris for the server.
Device Device Identifier
HDD0 /SYS/HDD0
HDD1 /SYS/HDD1
HDD2 /SYS/HDD2
HDD3 /SYS/HDD3
Note – Hard drive names in ILOM messages are displayed with the full FRU name,
such as /SYS/HDD0.
Related Information
"Hard Drive LEDs" on page 84
■
"Power On the Server"
OpenBoot PROM/Solaris Default Drive Path Name
c0::dsk/d1t0d0
c0::dsk/d1t1d0
c0::dsk/d1t2d0
c0::dsk/d1t3d0
Servicing Customer-Replaceable Units 83