Remove A Power Supply - Fujitsu SPARC Enterprise T5440 Service Manual
Fujitsu server user manual
Hide thumbs
Also See for SPARC Enterprise T5440:
- Service manual (214 pages) ,
- User manual (92 pages) ,
- Installation and setup manual (84 pages)
Table of Contents
Advertisement
3. Reconnect the power cord to the power supply.
Verify that the power supply LED is green or blinking green.
4. Verify that the system Power Supply Fault LED, and the front and rear Service
Required LEDs are not lit.
Note – See
information about identifying and interpreting system LEDs.
5. At the ILOM -> prompt, use the show faulty command to verify the status of
the power supplies.
▼ Remove a Power Supply
Caution – Hazardous voltages are present. To reduce the risk of electric shock and
danger to personal health, follow the instructions.
92
SPARC Enterprise T5440 Server Service Manual • June 2011
"Front Panel LEDs" on page 5
and
"Rear Panel LEDs" on page 8
for more
Advertisement
Table of Contents
