Observing Important Safety Precautions
For your protection, observe the following safety precautions when setting up your
equipment:
Follow all cautions and instructions marked on the equipment and described in
■
the documentation shipped with your system.
Follow all cautions and instructions marked on the equipment and described in
■
the SPARC Enterprise T5440 Server Safety and Compliance Guide.
Ensure that the voltage and frequency of your power source match the voltage
■
and frequency inscribed on the equipment's electrical rating label.
Follow the electrostatic discharge safety practices as described in this section.
■
Related Information
"Safety Symbols" on page 64
■
"Handling Electronic Components" on page 65
■
"Electrostatic Discharge Safety Measures" on page 65
■
Safety Symbols
Note the meanings of the following symbols that might appear in this document:
Caution – There is a risk of personal injury or equipment damage. To avoid
personal injury and equipment damage, follow the instructions.
Caution – Hot surface. Avoid contact. Surfaces are hot and might cause personal
injury if touched.
Caution – Hazardous voltages are present. To reduce the risk of electric shock and
danger to personal health, follow the instructions.
Related Information
"Safety Information" on page 63
■
64
SPARC Enterprise T5440 Server Service Manual • June 2011