About Oracle Vts Software; Verify Installation Of Oracle Vts Software - Fujitsu SPARC Enterprise T5440 Service Manual

About Oracle VTS Software

The Oracle VTS software features a Java-based browser environment, an ASCII-based
screen interface, and a command-line interface. For more information about how to
use the Oracle VTS software, see the Oracle VTS 7.0 User's Guide.
The Oracle Solaris OS must be running in order to use the Oracle VTS software. You
also must ensure that the Oracle VTS validation test software is installed on your
system.
This section describes the tasks necessary to use Oracle VTS software to exercise your
server.
Related Information
"Diagnostic Flowchart" on page 13
■
"Verify Installation of Oracle VTS Software" on page 42
■
"Start the Oracle VTS Browser Environment" on page 43
■
"Oracle VTS Software Packages" on page 45
■
"Useful Oracle VTS Tests" on page 46
■

▼ Verify Installation of Oracle VTS Software

To perform this procedure, the Oracle Solaris OS must be running on the server, and
you must have access to the Oracle Solaris command line.
Note – The Oracle VTS 7.0 software, and future compatible versions, are supported
on the server.
The Oracle VTS installation process requires that you specify one of two security
schemes to use when running Oracle VTS. The security scheme you choose must be
properly configured in the Oracle Solaris OS for you to run the Oracle VTS software.
For details, refer to the Oracle VTS User's Guide.
1. Check for the presence of Oracle VTS packages using the pkginfo command.
% pkginfo -l SUNWvts SUNWvtsmn SUNWvtsr SUNWvtss SUNWvtsts
■
42 SPARC Enterprise T5440 Server Service Manual • June 2011
If the Oracle VTS software is installed, information about the packages is
displayed.