How To Install And Remove - Fujitsu PRIMERGY BX600 S3 Hardware Manual

■ Server Blade installation location
When the Server Blade is installed to the Server Blade slot, the port of the Server Blade is connected to
each port of the Network Blade through the mid plain in the Chassis. Decide the slot to which to install
the Server Blade according to the network configuration.
For more details, refer to "4.2.3 LAN Connection in the Chassis" ( p.38).
The Server Blade slot numbers are indicated below.
If the Switch Blades or GbE Pass-Thru Blades that correspond with the various ports of the Server
Blade are not installed, the port cannot be used.
■ Storage Blade installation location
Install the Storage Blade to the right of the Server Blade to be connected.

4.2.2 How to Install and Remove

Installing/removing a Storage Blade can be performed in the same way as a Server Blade.
■ How to remove Server Blades/Storage Blades
1
Turn off the Server Blade.
Turn off the Server Blade to be removed or the Server Blade to which the Storage Blade to be
removed is connected.
"3.3 Turning Off the Server" (p.24)
2
Touch a metal part of the Chassis to discharge static electricity.
3
Remove all cables etc. connected to the Server Blade/Storage Blade.
Remove the display/USB expansion cables connected to the Server Blade/Storage Blade you
wish to remove, as well as cables connected to the expansion card slot module.
PRIMERGY BX600 S3 Blade Server System Unit Hardware Guide
1 2 3 4 5 6 7 8 9 10
35