Useful Oracle VTS Tests
Oracle VTS Tests
Memory Test
Processor Test
Disk Test
Network Test
Interconnect Test
IO Ports Test
Environmental Test
Related Information
"Diagnostic Flowchart" on page 13
■
"Oracle VTS Software Packages" on page 45
■
SPARC Enterprise T5440 Server Installation and Setup Guide
■
SPARC Enterprise T5440 Server Administration Guide
■
Detecting Faults Using POST
Run POST in maximum mode to detect system faults. See
Mode" on page
POST error messages use the following syntax:
c:s > ERROR: TEST = failing-test
c:s > H/W under test = FRU
c:s > Repair Instructions: Replace items in order listed by H/W under
test above
c:s > MSG = test-error-message
c:s > END_ERROR
In this syntax, c = the core number, s = the strand number.
Warning and informational messages use the following syntax:
INFO or WARNING: message
46
SPARC Enterprise T5440 Server Service Manual • June 2011
32.
FRUs Exercised by Tests
FB-DIMMs
CMP, motherboard
Disks, cables, disk backplane, DVD drive
Network interface, network cable, CMP,
motherboard
Board ASICs and interconnects
I/O (serial port interface), USB subsystem
Motherboard and service processor
"Run POST in Maximum