"Power On the Server" on page 157
■
Servicing the Fan Tray Carriage
You must remove the fan tray carriage in order to service the following components:
Hard drive backplane
■
Motherboard
■
Front control panel
■
Front I/O board
■
This topic includes the following:
"Remove the Fan Tray Carriage" on page 133
■
"Install the Fan Tray Carriage" on page 134
■
Related Information
"Servicing Fan Trays" on page 84
■
"Servicing the Hard Drive Backplane" on page 135
■
"Servicing the Motherboard" on page 139
■
"Servicing the Front Control Panel" on page 148
■
"Servicing the Front I/O Board" on page 150
■
▼ Remove the Fan Tray Carriage
Before you begin, complete these tasks:
Read the section,
■
Power off the server using one of the methods described in the section,
■
Off the System" on page
"Extend the Server to the Maintenance Position" on page 70
■
"Perform Electrostatic Discharge – Antistatic Prevention Measures" on page 73
■
"Remove a Fan Tray" on page 87
■
Note – You must remove all four fan trays.
"Remove the Top Cover" on page 73
■
"Safety Information" on page
67.
63.
Servicing Field-Replaceable Units
"Powering
133