Remove The Flex Cable Assembly - Fujitsu SPARC Enterprise T5440 Service Manual

Related Information
"Safety Information" on page 63
■
"Servicing Power Supplies" on page 89
■
"Servicing the Power Distribution Board" on page 130
■
"Servicing the Hard Drive Backplane" on page 135
■
"Servicing the Motherboard" on page 139
■

▼ Remove the Flex Cable Assembly

Before you begin, complete these tasks:
Read the section,
■
Power off the server, using one of the methods described in the section,
■
Off the System" on page
"Extend the Server to the Maintenance Position" on page 70
■
"Perform Electrostatic Discharge – Antistatic Prevention Measures" on page 73
■
"Remove the Top Cover" on page 73
■
Do the following:
1. Unplug the power cords.
2. Remove the flex cable retainer.
Loosen the captive No.2 Phillips screw and lift the retainer up and out of the
chassis.
"Safety Information" on page
67.
63.
Servicing Field-Replaceable Units
"Powering
145