Cmp And Memory Module Device Identifiers; Supported Cmp/Memory Module Configurations - Fujitsu SPARC Enterprise T5440 Service Manual

CMP and Memory Module Device Identifiers

The following table describes device, device identifiers, and supported
configurations for CMP and memory modules. Device identifiers are case-sensitive.
Device
CMP0
MEM0
CMP1
MEM1
CMP2
MEM2
CMP3
MEM3
Note – CMP and memory module names in ILOM messages are displayed with the
full FRU name, such as /SYS/MB/CPU0.
Related Information
"Managing Faults" on page 11
■
"FB-DIMM Configuration" on page 113
■
"Performing Node Reconfiguration" on page 159
■

Supported CMP/Memory Module Configurations

These are the supported CMP/memory module configurations, as viewed from the
front of the server.
Configuration
One CMP/memory pair
Two CMP/memory pairs
Three CMP/memory pairs
Device Identifier
/SYS/MB/CPU0/CMP0
/SYS/MB/MEM0/CMP0
/SYS/MB/CPU1/CMP1
/SYS/MB/MEM1/CMP1
/SYS/MB/CPU2/CMP2
/SYS/MB/MEM2/CMP2
/SYS/MB/CPU3/CMP3
/SYS/MB/MEM3/CMP3
CMP3 CMP1
MEM3 MEM1
X
X
Servicing Customer-Replaceable Units
CMP2 CMP0
MEM2 MEM0
X
X
X X
107