Installing The Tape Drive Unit; Securing The Server - Fujitsu SPARC Enterprise M5000 Service Manual

6.3.3

Installing the Tape Drive Unit

Caution – Do not force the tape drive unit into the slot. Doing so can cause damage
to the component and server.
●
Place the tape drive unit into the slot and gently push it in until it locks in
place.
6.3.4

Securing the Server

1. Add the tape drive unit to the domain.
This step includes using the cfgadm command to connect and confirm the tape
drive unit has been added to the domain. See
Domain" on page
2. Verify the state of the status LEDs on the tape drive.
4-5.
Section 4.2.3, "Adding a FRU Into a
Chapter 6 Storage Devices Replacement 6-27