Fujitsu SPARC Enterprise M5000 Service Manual page 82

5. Type the probe-scsi-all command to confirm that the storage devices are
mounted.
EXAMPLE 4-9
ok probe-scsi-all
/pci@0,600000/pci@0/pci@8/pci@0/scsi@1
MPT Version 1.05, Firmware Version 1.07.00.00
Target 0
Unit 0
73 GB
Target 1
Unit 0
73 GB
Target 3
Unit 0
ok
6. Type the boot command to start the operating system.
ok boot
4-18 SPARC Enterprise M4000/M5000 Servers Service Manual • December 2010
probe-scsi-all
Disk SEAGATE ST973401LSUN72G 0556
SASAddress 5000c5000092beb9
Disk SEAGATE ST973401LSUN72G 0556
SASAddress 5000c500002eeaf9
Removable Read Only device
SATA device PhyNum 3
143374738 Blocks,
PhyNum 0
143374738 Blocks,
PhyNum 1
TSSTcorpCD/DVDW TS-L532USR01