C.8.2
CD-RW/DVD-RW Drive Unit (DVDU)
There are two types of CD-RW/DVD-RW drive units: tray load or slot load. Each
type of drive unit will connect only with its corresponding drive unit backplane.
TABLE C-9
Drive Unit.
TABLE C-9
Number of CD-RW/DVD-RW Drive Units
Location
Active replacement capability
Hot replacement capability
Cold replacement capability
Interface
Refer to
page 6-12
C.8.3
Tape Drive Unit (TAPEU)
TABLE C-10
unit.
TABLE C-10
Number of tape drive units
Location
Active replacement capability
Hot replacement capability
Cold replacement capability
Tape drive unit type
Interface
lists the features, location, and specifications of the CD-RW/DVD-RW
CD-RW/DVD-RW Drive Unit Features and Specifications for Midrange
Servers
Section 6.2, "CD-RW/DVD-RW Drive Unit (DVDU) Replacement" on
for replacement procedures.
lists the features, location, and specifications of the optional tape drive
Tape Drive Unit Features and Specifications for Midrange Servers
*
Midrange Servers
1
Front of system to the right of the disk drives
No
Yes
Yes
Advanced Technology Attachment Packet Interface
(ATAPI)
Midrange Servers
1 (optional)
Front of system
Yes
Yes
Yes
Digital audio tape (DAT) drive
Serial Advanced Technology Attachment (SATA) (see
)
TABLE C-11
Appendix C
FRU List
C-11