Fujitsu SPARC Enterprise M5000 Service Manual page 210

3. Confirm that the installed CPU module is recognized by the server and that the
error indicator asterisk (*) is not displayed.
XSCF> showhardconf -M
4. Confirm that no error has occurred.
XSCF> showlogs error -v
XSCF> showstatus
5. Change the key position on the operator panel from Service to Locked.
6. Set the following for the CPU module:
■
■
■
■
Refer to Chapter 2, "Setting Up XSCF," in the SPARC Enterprise
M3000/M4000/M5000/M8000/M9000 Servers XSCF User's Guide for information
about these settings.
7. Power on all the domains.
XSCF> poweron -a
8. Confirm that all the domains have been correctly started.
XSCF> showlogs power
9. Confirm that no error has occurred.
XSCF> showlogs error -v
XSCF> showstatus
12-14 SPARC Enterprise M4000/M5000 Servers Service Manual • December 2010
Set up XSB.
Set up the LSB.
Add the XSB to the domain.
Set up the CPU operational mode on the domain.