System Boards; Motherboard Unit; C.2 System Boards; C.2.1 Motherboard Unit - Fujitsu SPARC Enterprise M5000 Service Manual

Fujitsu server user manual
Hide thumbs Also See for SPARC Enterprise M5000:
Table of Contents

Advertisement

C.2

System Boards

C.2.1

Motherboard Unit

The motherboard unit is the main circuit board for the midrange servers. The
following components connect to the motherboard unit:
CPU modules (two CPU chips per module)
Memory boards
Backplane unit
I/O unit(s) through the I/O backplane
eXtended System Control facility unit through the busbar/I/O backplane/power
backplane unit
Motherboard DC-DC Converter
The M4000 server motherboard unit provides power and signals to its mounted
components by a riser card. The M5000 server motherboard unit supplies power to
its mounted components from the power supply backplane by the bus bar/I/O
backplane/power backplane unit. To remove and replace the motherboard you must
power off the system, which is serviced from the top of the servers.
Refer to
procedures.
Section 13.1, "Motherboard Unit Replacement" on page 13-1
for replacement
Appendix C
FRU List
C-3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sparc enterprise m4000

Table of Contents