Power Systems Replacement; Power Supply Unit Replacement - Fujitsu SPARC Enterprise M5000 Service Manual

7
C H A P T E R

Power Systems Replacement

This chapter describes the power supply units and how to remove and replace them.
This information is organized into the following topic:
Section 7.1, "Power Supply Unit Replacement" on page 7-1
■
7.1

Power Supply Unit Replacement

Power supply units are hot, active, or cold replacement components. When using
active replacement, only one power supply unit should be replaced at a time to
ensure redundancy.
The power supply unit backplane is part of the backplane unit. See Section 14.1,
"Backplane Unit Replacement" on page 14-1 for remove and replace procedures.
7-1