Accessing The Tape Drive Unit; Removing The Tape Drive Unit - Fujitsu SPARC Enterprise M5000 Service Manual

6.3.1

Accessing the Tape Drive Unit

●
Remove the tape drive unit from the domain.
This step includes using the cfgadm command to determine the Ap_Id and
disconnecting the tape drive. See
on page
6.3.2

Removing the Tape Drive Unit

Caution – Use proper ESD grounding techniques when handling components. See
Section 1.1, "Safety Precautions" on page
1. Put a No. 1 screwdriver into the tape drive unit release hole to release the catch
that holds the tape drive unit in place (
2. Remove the drive from the server and place it on the ESD mat.
Removing the Tape Drive
FIGURE 6-10
6-26 SPARC Enterprise M4000/M5000 Servers Service Manual • December 2010
4-4.
Section 4.2.1, "Removing a FRU From a Domain"
1-1.
).
FIGURE 6-10