9.1.2
Removing the XSCF Unit
Caution – Use proper ESD grounding techniques when handling components. See
Section 1.1, "Safety Precautions" on page
1. Pinch the handle and then pull the lever on the XSCF unit downward to unseat
the board (
2. Remove the board from the slot and place it on the ESD mat.
XSCF Unit Removal
FIGURE 9-3
9-4
SPARC Enterprise M4000/M5000 Servers Service Manual • December 2010
).
FIGURE 9-3
1-1.