Fujitsu DL9300 User Manual page 96

DPL24C+ XL24E
COUR 10 PRSTG12
OCR-A COUR-N
TIMLS-N TIMLS-B
LETTER REPORT DRAFT
User's Manual
Table 5.1 Setup Mode Functions (Cont.)
Function
DEFAULT
LIST
SELF-TST
HEX-DUMP
V-ALMNT
To select a function from the <<FUNCTION>> menu:
1. Repeatedly press the " " or " " button to position the red
cursor on the plastic print guide under the function you require.
2. Press the " " button or the " " button to select the function. If
the function has items and options, the printer prints the first
item and its options. The MENU1, MENU2, HARDWRE,
ADJUST, CONFIG, and GAP-ADJ functions contain items that
have selectable options. The other functions have neither
items nor options.
The first three MENU1 items and their options are shown
below. Items are enclosed in single brackets < >.
ESC/P2
COMPRSD BOLDFCE PICA 10
COUR-B COUR-I N.SAN-N
TIMLS-I DOWNLD0 DOWNLD1
USING SETUP MODE
Purpose
Resets factory defaults in MENU1 and
MENU2.
Prints a list of all currently selected options.
Runs the self-test.
Prints hex dumps.
Checks and corrects vertical print alignment.
<EMULATE>
<FONT>
CORRESP OCR-B
N.SAN-B N.SAN-I
<QUALITY>
5-5