Using Single Sheets; Loading A Single Sheet Of Paper - Fujitsu DL9300 User Manual

USING SINGLE
SHEETS
User's Manual
Table 3.2 Paper Thickness Indicator Settings
Number of Copies
(Including the Original) *1
1 copy
2 copies
3 copies
4 copies
5 copies
6 copies
7 copies
8 copies
Envelops
Slips
Ribbon replacement
*1 For carbon-interleaved paper, the carbon counts as one copy.
*2 Vary the setting up or down (including A to R) to optimize
printing. Select R when replacing a ribbon or clearing a paper
jam. For labels and envelopes, use trial-and-error to determine
a satisfactory setting.
This section describes how to load paper from the paper table or cut
sheet feeder. The paper table allows paper to be loaded manually, one
sheet at a time. A cut sheet feeder allows paper to be loaded automati-
cally from the paper bin.

Loading a Single Sheet of Paper

To load a sheet of paper from the paper table:
1. Make sure that the printer is turned on.
2. Press the PAPER PATH button to select CUT SHEET (the
indicator lights).
3. Put the paper table in the nomal position (horizontal).
PAPER HANDLING
Setting *2
1
2
3
4
5
6
7
8
A
B, C, D
R
3-7