Fujitsu DL9300 User Manual page 77

PAPER HANDLING
3-20
7. Fit the paper feed holes onto the left and right tractor pins.
Adjust the right tractor to the width of the form. Close the
paper holders.
Paper holders
Adjusting paper tension
8. Pull the right tractor to stretch the paper taut. Push the right
locking lever down to secure the tractor in place.
9. Lower the paper table to the down position (normal mode).
Paper table
Lowering the cut sheet stand
CAUTION
• Before lowering the paper table, make sure that the paper
holders are closed.
If the holders are opened, they may cause damage to the
tractors and the paper table.
• Make sure that the paper table is positioned to its normal
mode. If it is not done, jamming may occur when continuous
forms paper is fed.
User's Manual