Fujitsu DL9300 User Manual page 235

GLOSSARY OF TERMS
Carriage return (CR)
Centronics interface
Column
Command set
Condensed print
Continuous forms
Control panel
cpi
cps
Cut sheets
Cut sheet feeder
Defaults
GL-2
The return of the print head carriage to the beginning of the
next line.
A type of parallel interface. See Parallel interface.
A vertical section on a printed page. This printer can print 136-
column pages at 10-pitch (10 characters per inch).
A set of print and format commands used to control the
printer. Each printer has its own resident command sets
embedded in the printer firmware. These command sets are
actuated by codes sent from the host computer.
Print that uses "condensed" characters. Condensed characters
are narrower than regular characters. Using condensed print
increases the number of characters per line.
Connected, fan-folded sheets of paper that are fed into the
printer using forms tractors. The fan-folded sheets are
separated by tearing them at their perforations.
A panel containing the printer indicators and buttons. The control
panel is used to control printer operations, such as loading paper,
selecting print features, and changing setup options.
Characters per horizontal inch. Also referred to as pitch. For
example, 12-pitch means 12 cpi.
Characters per second.
See Single sheets.
An option that allows automatic loading from a stack of cut
sheet paper.
Settings selected automatically by the printer when power is
turned on. Enter setup mode to change the defaults to ensure
compatibility with your system hardware and software.
User's Manual