Fujitsu DL9300 User Manual page 137

USING SETUP MODE
5-46
4. Exit the HEX-DUMP function.
Exit the HEX-DUMP function in either of the following
ways:
• To remain in setup mode, press the FRONT DIR button.
The <<FUNCTION>> menu is then reprinted. For details
on other functions, see other sections in this chapter.
• To return to online normal mode, press the ONLINE button.
If you press the ONLINE button while the hex dump is
printing, printing. The printer immediately switches to
normal online mode. Any data that was sent to the printer
but not printed is discarded (cleared).
You can also enter hex dump mode, by turning off the printer, and
then turning the printer back on while simultaneously pressing the
ONLINE button and the LF/FF button until the printer beeps.
Sample hex dump
User's Manual