Fujitsu DL9300 User Manual page 236

Dot matrix
Downloading
dpi
Emulation
Factory default
Font
Form feed (FF)
Front feed
Graphics printing
Hexadecimal
User's Manual
The grid used to print characters on a dot matrix printer. Each
dot corresponds to a wire in the print head.
Transferring soft fonts from the computer to the printer's
memory. Downloading allows you to use fonts not resident in
the computer.
Dots per inch.
A command set that allows one printer to print like another
printer. This printer has three resident emulations: Fujitsu
DPL24C PLUS (native command set), IBM proprinter XL24E,
and Epson ESC/P2.
The settings that are programmed into a printer at the factory.
The printer uses these settings unless they are replaced by user
settings selected from the control panel or through application
software.
A complete set of printable characters having the same size
and style. For example, Courier 10 and Prestige Elite 12 are
commonly used fonts.
A signal to the printer to advance the paper forward one page.
Form feeds can be executed either by your software or by
holding down the LF/FF button on the printer control panel.
The feeding of paper through the tractor unit attached at the
front of the printer.
Controlling the print head wires (dots) individually to produce
a picture or an image on the page.
A base-16 numbering system (also commonly referred to as
hex numbers). Since a base-16 system requires 16 digits,
numbers 0 through 9 and letters A through F are used.
Expressing binary numbers in hexadecimal uses fewer digits.
GLOSSARY OF TERMS
GL-3