Fujitsu DL9300 User Manual page 125

Fujitsu dl9300/9400 dot matrix printer user's manual
Hide thumbs Also See for DL9300:
Table of Contents

Advertisement

USING SETUP MODE
5-34
Table 5.5 ADJUST Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
ADJUST
Items
<CNT-LFT>
-10/90, ..., 0/90,
..., 10/90
<CUT-LFT>
-10/90, ..., 0/90,
..., 10/90
<CUT-ADJ>
-22/360, ..., 0/360,
..., 22/360
<==END==>
Options
Fine-tunes the left print
start position for
continuous forms.
Moves the position left or
right in increments of 1/90
inch (0.28 mm).
Fine-tunes the left print start
position for single sheets.
Moves the position left or
right in increments of
1/90 inch (0.28 mm).
Compensates the line
spacing pitch on the basis
of the spacing error
accumulated for feeding
single sheets by10 inches.
Decreases or increases in
increments of 1/360 inch in
total.
Indicates the end of the
ADJUST item list. Press
MICRO to print the first
item, which is <CNT-
ORG>. Press MICRO to
print the last item, which is
<CUT-ADJ>. Press
ONLINE to reprint the
<<FUNCTION>> menu.
Description
User's Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dl9400

Table of Contents