Fujitsu DL9300 User Manual page 62

User's Manual
(1) Paper table
(2) Front tractor
(3) Rear tractor
(4) Front cut sheet feeder
(5) Rear cut sheet feeder
Avairiable combinations of paper paths and feed directions are
below:
• (1)+(2)+(3)
• (1)+(2)+(3)+(5)
• (1)+(3)+(4)
• (1)+(3)+(4)+(5)
When loading the paper from the rear cut sheet feeder, it is
impossible to store a lot of paper in the rear stacker.
NOTE
With the front cut sheet feeder installed, if you print paper from the
paper table or the front cut sheet feeder and specify the front
ejection, the printer blinks the FRONT indicator after ejecting the
paper to the paper table and stops printing before you start the next
printing.
To restart printing, remove the paper. You must remove paper one
by one.
PAPER HANDLING
Platen Paper table (normal mode)
or
Rear stacker
Platen Rear ejection
Platen Front ejection
Platen Paper table (normal mode)
or
Rear stacker
Platen Paper table (stack mode)
or
Rear stacker
3-5