Connecting The Power Cord - Fujitsu DL9300 User Manual

SETTING UP
CONNECTING THE
POWER CORD
2-14
Before you plug in the printer:
Make sure that the printer power is switched off. The side
marked "|" on the power switch should be raised.
Make sure that the power outlet is properly grounded.
Make sure that you use the power cord shipped with the
printer. This cord is designed to minimize radio frequency
interference.
To plug in the power cord:
1. Plug one end of the power cord into the power connector on the
rear of the printer.
2. Plug the other end of the power cord into the power outlet.

Connecting the power cord

User's Manual