Fujitsu DL9300 User Manual page 158

User's Manual
Table 7.2 Paper Handling Problems and Solutions (Cont.)
Problem
Paper jams while Turn off the printer and remove the jammed
loading. paper. Remove any obstructions from the
paper path.
If you are using a cut sheet feeder, make sure
that the bin lever is set to the "CLOSED"
position. (The bin lever is on the left side of the
feeder.)
Make sure that the paper is not folded, creased,
or torn.
Reload the paper.
Make sure that the paper table is normal mode.
Set the paper table to normal mode.
Paper jams while Turn off the printer and remove the jammed
printing. paper. Remove any obstructions from the
paper path.
For continuous forms, make sure that the
incoming and outgoing paper stacks are
correctly placed. Paper should feed straight.
Make sure that the paper table is normal mode.
Set the paper table to normal mode.
If you are using a cut sheet feeder, make sure
that the bin lever is set to the "CLOSED" posi
tion. (The bin lever is on the left side of the
feeder.)
Reload the paper.
TROUBLE-SHOOTING
Solution
7-5