Fujitsu DL9300 User Manual page 111

USING SETUP MODE
5-20
Table 5.3 MENU1 and MENU2 Items and Options (Cont.)
NOTES:
• Underlined options are the factory defaults.
• Asterisks identify items and options that differ for the IBM XL24E and
Epson ESC/P2 emulations. The notes are defined at the end of the table.
MENU1 and
Options
MENU2 Items
<TOP-MRG>
## LINE
<LANGUGE>
Description
Specifies the number of space lines
for the top margin. The resultant
blank space is the <TOP-MRG>
setting minus 1 line.
The total size of your top margin is the
above resultant value plus the following
two settings: top-of-form (default = 1
inch) and the software-specified top
margin. If you are using software to
specify the top margin, use the
default (1 line) for <TOP-MRG>.
1, 2, 3,4, 5, 6, 7, 8, 9, or 10 lines
Selects a language. Appendix E shows
the character sets for each language.
Two-pass means that diacritical marks
are printed separately from their
letters and that letters are printed
without any reduction.
Top-of-form
Top margin
setting
User's Manual