Appendix C Command Sets; Fujitsu Dpl24C Plus - Fujitsu DL9300 User Manual

COMMAND SETS (DPL24C PLUS)

FUJITSU DPL24C PLUS

C-2
This section describes the printer commands for the DPL24C PLUS
command set which is the native command set of this printer. See the
Programmer's Manual (DPL24C PLUS) for detailed information on
using these commands.
Function
Print Mode Control
Double-strike (bold) printing on
Double-strike (bold) printing off
Emphasized (shadow) printing on
Emphasized (shadow) printing off
Italic printing on
Italic printing off
Select character style and screening
n = 0: Normal
1
1: Outline
2: Shaded
3: Outline and shaded
4: Thin outline
5: Thin shaded
6: Thin outline and shaded
n = 0: Transparent
2
1: Light dot matrix
2: Heavy dot matrix
3: Vertical bars
4: Horizontal bars
5: Slants
6: Back slants
7: Lattice
One-line double width characters on
One-line double width characters off
Double width characters on/off
(on: n = 1, off: n =0)
Command
ESC G
ESC H
ESC E
ESC F
ESC 4
ESC 5
ESC e S (n ) (n )
1 2
SO or ESC SO
DC 4
ESC W (n)
User's Manual