7. Insert the tray into the printer, and push until it stops.
8. If you load any print media into the tray, configure the Paper Type setting for that tray according to the message
on the operator panel.
Loading Letterhead
Place the printed side face up.
Print media source
Standard 500-sheet tray
Optional 500-sheet tray module or 1000-sheet tray
module
Multipurpose feeder
Multipurpose Feeder
Capacity
The maximum stack height is 15 mm (0.6 in.). The multipurpose feeder can hold approximately:
150 sheets or a stack less than 15 mm (60 g/m2 to 216 g/m2) paper.
Print Media Dimensions
Print side
Face up
Face down
Page orientation
Back of tray
Logo enters the printer
first