Dell 5100cn Color Laser Printer User Manual page 55

10. Plug the power cable into the power cable connecter at the back of the printer, wind the power cable onto the cable
hook as shown in the graphic, and lightly pull the power cable. Then, plug the other end of the cable into the
grounded outlet.
11. Turn on the printer.
NOTE: The printer will automatically detect the attached tray(s) but will not detect the paper type.
12. Print a Printer Settings page to verify the optional 1000-sheet tray module is installed correctly.
a. Press Menu.
b. Press until Configure appears, and then press
c. Press until Reports appears, and then press
d. Printer Settings is displayed. Press
The Printer Settings page is printed.
e. Verify 1000 Sheet Tray Module is listed in the printer settings under Printer Options.
If the tray modules are not listed, turn off the printer, unplug the power cable, and reinstall the optional
1000-sheet tray module.
13. After loading paper in the installed tray, specify the paper type from the printer operator panel.
Press until the paper type for the installed tray appears, and then press
14. If you installed the optional 1000-sheet tray module after installing the printer driver, update your driver by
or .
or .
.
.