Dell 5100cn Color Laser Printer User Manual page 160

Toner smears or print
comes off page.
Toner spots appear on
the page/printing is
blurred.
Entire page is white.
Streaks appear on the
page.
Settings menu. See
· Verify that the correct print media is being used.
· The imaging drum may need to be replaced. Change the imaging drum.
· The developer is damaged. Contact Dell. See "Contacting Dell" in the Owner's Manual.
· If you are printing on an uneven print surface, change the Paper Type settings in the Tray
Settings menu. See
· Verify that the print media is within the printer specifications.
· The fuser is old or damaged. Replace the fuser. See
Roller".
· Check the toner cartridge to make sure it is installed correctly.
· Change the imaging drum. See
· The developer is damaged. Contact Dell. See "Contacting Dell" in the Owner's Manual.
· Make sure the packaging material is removed from the toner cartridge.
· Check the toner cartridge to make sure it is installed correctly.
· The toner may be low. Change the toner cartridge. See
· The developer is damaged. Contact Dell. See "Contacting Dell" in the Owner's Manual.
· The toner may be low. Change the toner cartridge. See
· If you are using preprinted forms, make sure the toner can withstand temperatures of 0 °C to
35 °C.
"Paper Type."
"Paper Type."
"Replacing the Imaging
"Replacing the Fuser and Separator
Drums."
"Replacing the Toner
"Replacing the Toner
Cartridge."
Cartridge."