Dell 5100cn Color Laser Printer User Manual page 168

29. Click the Properties button to the right.
30. This brings up Driver Properties.
31. Click on the Paper Tray Tab.
32. Change the Paper Source to Tray 1.
33. Click the Paper Tab.
34. Select in paper size, Letter.
35. Select for Output Size, Same as Paper Size.
36. Click OK.
37. Click Close.
38. Now the printer driver is setup correctly.
39. Now go to File ® Page Setup.
40. Click the Paper Tab.
41. Change Paper Size to Legal.
42. Change the Paper source settings BOTH to "DEFAULT TRAY AS PER PRINTER".
43. Click OK.
44. Type in some gibberish in the body of the document and click Print!
Setup printing Letter Plain 1 from Tray2
1. On the printer operator panel press MENU.
2. Press to get to Tray Settings.
3. Press to select Tray Settings.
4. Press to get to Paper Size. (ONLY ON 3x00cn)
5. Press to select Paper Size. (ONLY ON 3x00cn)
6. Press to get to Tray 2. (ONLY ON 3x00cn)
7. Press to select Tray 2. (ONLY ON 3x00cn)
8. Using and , select the appropriate paper size (Letter). (ONLY ON 3x00cn)
9. Press the middle button, SELECT, once Letter is displayed on the lower line, this puts a * by it. (ONLY ON 3x00cn)
10. Now we have the Tray 2 Size set to Letter. (ONLY ON 3x00cn)
11. Now press MENU to get back to Tray Settings/Paper Size.
12. Press to get to Paper Type.
13. Press to select Paper Type.
14. Press to get to Tray 2.
15. Press to select Tray 2.
16. Using and ,, select the appropriate paper type (Plain 1).
17. Press SELECT, once Plain 1 is displayed on the lower line.
18. Now we have the Tray 2 Type set to Plain 1.