4. Before loading the print media, flex the sheets back and forth, and then fan them. Straighten the edges of the stack on a level surface.
5. Place the print media into the tray with the recommended print side face up.
NOTE:
Do not exceed the maximum fill line in the tray. Overfilling the tray may cause paper jams.
6. Slide the width guides and length guide until they rest lightly against the edge of the print media stack.
7. Insert the tray.
8. If you load any print media into the tray, configure the Paper Type and Paper Size settings for that tray according to the message.
Loading Letterhead
Place the printed side face up.
Print media source
Standard 250-sheet tray module
Optional 250-sheet tray module or 500-sheet tray module
Multipurpose feeder
Print side
Face up
Face up
Page orientation
Back of tray
Logo enters the printer first