Dell 5100cn Color Laser Printer User Manual page 161

Characters have
jagged or uneven
edges.
Part or all of the page
prints in black.
The job prints, but the
top and side margins
are incorrect.
Printing on both ends
of the transparencies
is faded.
· Change the Print Mode in the Graphics tab (or Advanced dialog box) to Standard in the
printer driver.
· If you are using downloaded fonts, verify that the fonts are supported by the printer, the host
computer, and the software program.
· Check the toner cartridge to make sure it is installed correctly.
· Make sure the margins are set correctly in your software program.
· This occurs when the printer is operating in a location where relative humidity reaches 85% or
more. Adjust the humidity or relocate the printer to an appropriate environment.