7.
Insert the tray into the multifunction printer, and push until it stops.
8.
Select the paper type from the operator panel if any print media other than plain print media is loaded.
If a user-specified print media is loaded, you must specify the paper size setting by using the operator
panel.
Loading Letterhead
The letterhead must be toward the top edge of the standard tray or the optional feeder with the print side
facing up. However, the letterhead must be inserted top edge first with the print side facing down when
loading paper into the multipurpose feeder.
Print media source
Standard 250-sheet tray
Optional 550-sheet paper
feeder
Multipurpose feeder
Multipurpose Feeder
Capacity
The multipurpose feeder can hold approximately:
Print side
Face up
Face down
Page orientation
Letterhead enters the multifunction
printer last
Letterhead enters the multifunction
printer first