Dell 5100cn Color Laser Printer User Manual page 28

Current Ethernet
Settings
MAC Address
Port LPD
Settings
Port9100
1
IPP*
FTP
1
SMB*
1
NetWare*
AppleTalk*
E-Mail Alert
SNMP Agent
*1 An optional multi protocol card is required to use.
NOTE: The settings in the Port Settings item will be valid only when the printer is rebooted. When you change or
set this item, click the Restart printer to apply new settings. button to apply new settings.
TCP/IP
Purpose:
To configure the IP address, subnet mask, and gateway address of the printer.
Values:
TCP/IP Host Name
Settings
IP
Address
Mode
IP Address
Subnet Mask
Gateway Address
100BASE-TX Selects 100Base-T Full-Duplex as the default value.
Full-Duplex
Displays the current settings of Ethernet.
Displays the printer's MAC address.
Select the check box to enable the LPD.
Select the check box to enable the Port9100.
Select the check box to enable the IPP port.
Select the check box to enable the FTP port.
Select the check box to enable the SMB.
You can also configure the transport protocol to be used. TCP/IP and NetBEUI
can be selected simultaneously as the transport protocol.
Select the check box to enable the NetWare port.
Select the check box to enable the AppleTalk port.
1
Select the check box to enable the E-Mail Alert feature.
Select the check box to enable the SNMP.
You can also configure the transport protocol to be used. UDP and IPX can be
selected simultaneously as the transport protocol.
IPX is only available when the multi protocol card is installed.
Specifies the host name up to 15 alphanumeric characters. The default name will
remain valid if no entry is made.
AutoIP Automatically sets the IP address.
DHCP Uses DHCP to set the IP address.
BOOTP Uses BOOTP to set the IP address.
RARP Uses RARP to set the IP address.
Manually Enables the IP address set in IP Address.
Set
Sets the IP address allocated to the printer in the nnn.nnn.nnn.nnn format. Each
section of nnn.nnn.nnn.nnn is a value between 0 and 254. Note that values 127 and
224 to 254 are not valid for the first three-digits.
Sets the subnet mask in the nnn.nnn.nnn.nnn format. Each section of
nnn.nnn.nnn.nnn is a value between 0 and 255. Note that 255.255.255.255 is invalid.
Sets the gateway address in the nnn.nnn.nnn.nnn format. Each section of
nnn.nnn.nnn.nnn is a value between 0 and 254. Note that values 127 and 224 to 254