Loading Letterhead; Selecting Pre-Punched Paper - Dell 1355 Color Laser User Manual

Page orientation is important when printing on letterhead. Use the following
table for help when loading letterhead in the print media sources.

Loading Letterhead

Load the letterhead in the printer with the print side facing up. Ensure that
the title on the letter head enters the printer first.
Multipurpose Feeder (MPF)

Selecting Pre-Punched Paper

Pre-punched paper brands can differ in the number and placement of holes
and in manufacturing techniques. However, it may not be possible to print on
the paper to depending on the placement of holes on the paper.
To select and use pre-punched paper:
• Test paper from several manufacturers before ordering and using large
quantities of pre-punched paper.
• Paper should be punched at the paper manufacturer and not drilled into
paper already packaged in a ream. Drilled paper can cause jams when
multiple sheets feed through the printer. This may result in a paper jam.
• Pre-punched paper can include more paper dust than standard paper. Your
printer may require more frequent cleaning and feed reliability may not be
as good as standard paper.
• Weight guidelines for pre-punched paper are the same as non-punched
paper.
Priority Sheet Inserter (PSI)
Print Media Guidelines
193