Dell 5100cn Color Laser Printer User Manual page 257

Function
Reads SunRaster data, converts it to the PostScript language program and writes to standard output. If the filename is
not specified, the standard input will be taken as the command input. SunRaster files with a pixel depth of 1, 8, 24, and
32 bits can be specified.
sunran2ps2 takes filename as having been created in 72dpi and calculates the output size. Thus, to convert SunRaster
files created in other resolutions, specify the size option (-s, -S) explicitly.
Option
-d
Enables the short-edge binding feature. When it is specified, the printing direction or position will be adjusted and
both sides of the paper printed so that the shorter edge of the pages can be bound.
-D
Enables the long-edge binding feature. When it is specified, the printing direction or position will be adjusted and
both sides of the paper printed so that the longer edge of the pages can be bound.
-Itray-input
Specifies the paper tray.
A paper tray can be selected by directly specifying a tray or by specifying a paper size.
When a paper size is specified, the tray loaded with paper of the specified size will be found and selected
automatically.
The parameters for selecting a paper tray are as follows.
1
Feed paper from tray 1 (standard 500-sheet tray).
2
Feed paper from tray 2 (optional 500-sheet tray module or 1000-sheet tray module).
3
Feed paper from tray 3 (optional 1000-sheet tray module).
4
Feed paper from tray 4 (optional 1000-sheet tray module).
A4
Feed paper from the tray loaded with A4 (210 x 297 mm).
A5
Feed paper from the tray loaded with A5 (148 x 210 mm).
A6
Feed paper from the tray loaded with A6 (105 x 148 mm).