Copy-Quality Problems - Xerox Phaser 6180MFP User Manual

Copy-Quality Problems

When the copy quality is poor, select the closest symptom from the following table to correct
the problem.
If the copy quality does not improve after carrying out the appropriate action, contact Xerox
Customer Support or your reseller.
Symptom
Lines or streaks only
present in copies made
from the ADF
Spots present in copies
taken from the
document glass
The reverse side of the
original is showing on
the copy
Light colors are washed
out or white on the copy
Image is too light or
dark
Reason/Action
There is debris on the document glass. When scanning, the paper from the
ADF passes over the debris creating lines or streaks.
Clean the glass with a lint free cloth.
There is debris on the document glass. When scanning, the debris creates
a spot on the image.
Clean the glass with a lint free cloth.
Copy
On the menu, enable
For information on turning Auto Exposure on and off, see
Exposure on page 6-8.
Auto Exposure is enabled.
Copy
On the menu, disable
For information on turning Auto Exposure on and off, see
Exposure on page 6-8.
If the copied image is too light or dark, use the
Copy
the menu.
For information on making the image lighter or darker, see
Image Lighter or Darker on page 6-6.
Phaser® 6180MFP Multifunction Printer
10-24
Auto Exposure
.
Auto Exposure
.
Lighten/Darken
Print Quality
Setting Auto
Setting Auto
option on
Making the