Connecting Via Usb - Xerox DocuPrint C2090 FS Quick Reference Manual

Connecting via USB

1. Click the [Connected via USB],
connect the MFP with the USB
cable provided and click [NEXT]
to continue.
2. Software installation is in
progress. When the installation is
completed. Click [Finish] to
close the wizard.
Note:
Make sure that your USB cable is
properly connected to your PC /
Notebook and the machine is pow-
ered on before you use the [Con-
nected via USB] function.
23 - Getting started
Connecting via the Network
1. Select the [Connected via the
network], and click [NEXT] to
continue.
2. There are two methods of identi-
fying the MFP. Click the recom-
mended [Search from a list of
detected MFPs], and click on
[NEXT] to continue.
3. If your MFP is not found on the
network, please check the con-
nections and click [Refresh] to
search again. Press [NEXT] to
proceed if your MFP detected the
network.