Loading Envelopes - Xerox DocuPrint C2090 FS Quick Reference Manual

4. Slide the width guides inward
until they rest lightly against the
edge of the paper
stack.
1
5. Close cover D.
6. Set the paper size and type
according to the message dis-
played on the control panel.
Notes:
• Do not apply excessive force to
the Cover D when you open or
close it; doing so may damage the
machine.
• Do not load paper past the maxi-
mum fill line or maximum allowed
capacity
• Set the paper guides to the cor-
rect paper width. If the paper
guides are not in place, the paper
will not be properly fed and this
may cause paper jams.
• When you print on paper fed from
the paper tray, set the paper size
and type in the print driver.
- Paper handling
65

Loading envelopes

Envelopes should be loaded in the
paper tray.
Load envelopes with the address
side facing up as shown in the dia-
gram below.
3
2
Note:
Envelope that is
under 220 mm in
width
Paper feed
direction
Under
Flap
220 mm
Flap
The flap open
and toward you.
Example:
Monarch (98.4
x190.5mm), DL
(110 x 220 mm),
C5 (162 x
229mm)
The reverse side of the envelope
cannot be printed on.
Envelope that
is over 220
mm in width
Paper feed
direction
Over
220 mm
The flap
folded and
on the left
Example:
Com#10
(104.78 x
241.3mm)